Their are a few differences from the P.2 and the Specialized P.2 Cr-Mo 2010 Mountain Bike, the more obvious is the Cr-Mo featured all around. 2010 Specialized P.2 Cr-Mo Mountain Bike contains a P. Series Reynolds 520 Cr-Mo frame, Marzocchi DJ3 Cr-Mo fork, P.Disc AM double wall rims, and SBC Aggro Stem. Some additional details are on the bottom bar and and seat, and comes in brown. MSRP is $1100.

Specialized P.2 Cr-Mo 2010 Mountain Bike

(16 votes, average: 4.38 out of 5)

 Loading ...

Specialized P.2 Cr-Mo 2010 Mountain Bike Frameset
Frame: P. Series Reynolds 520 Cr-Mo, double-butted TT/DT, externally relieved HT, disc mount, 6mm offset horizontal drop out w/ integrated tensioner system, replaceable alloy der hanger, disc only
Rear Shock: n/a
Fork: Marzocchi DJ3, 80mm, Cr-Mo steerer, 32mm Cr-Mo stanchions, magnesium lower, cold forged crown, fixed rate damping, coil/mcu w/ preload adj., “stiff” spring

Specialized P.2 Cr-Mo 2010 Mountain Bike Wheels
Rims: P.Disc AM, double wall disc w/ eyelets, 36h
Front Hub: Forged alloy, machined high/low flange and disc mount, ground race, 36h, nutted 3/8″ axle
Rear Hub: Forged alloy cassette, machined flanges and disc mount, double sealed, ground race, 36h, nutted 3/8″ axle
Spokes: 2mm (14g) stainless
Front Tire: Specialized Rhythm Lite Control, 26×2.3″, 60TPI, aramid bead
Rear Tire: Specialized Rhythm Lite Control, 26×2.3″, 60TPI, aramid bead
Inner Tubes: Schraeder valve

Specialized P.2 Cr-Mo 2010 Mountain Bike Drivetrain
Front Derailleur: n/a
Rear Derailleur: SRAM X-5, short cage
Shift Levers: SRAM X4-R 8sp trigger
Cassette: SRAM PG-830, 8-speed, 11-28t
Chain: KMC X8 w/ reuseable Missing Link
Crankset: Fuse tubular heat treated Cr-Mo 2pc w/ hollow 19mm spindle
Chainrings: 34A w/ poly bash guard and Specialized ISCG chain guide
Bottom Bracket: Threaded Euro, alloy cups, 4x cartridge bearing, alloy spacers
Pedals: SBC Lo-A1, Alloy platform w/ removable pins, 9/16″

Specialized P.2 Cr-Mo 2010 Mountain Bike Components
Headset: Integrated cartridge bearing, Campy type, 1-1/8″ threadless
Stem: SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length
Handlebars: Alloy riser bar, 55mm rise, 680mm wide, 8 degree back sweep, 7 degree up
Grips: Fuse BMX, single compound, closed end, 140mm
Front Brake: Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor
Rear Brake: Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor
Brake Levers: Avid FR-5, alloy, two-finger, linear pull
Saddle: Specialized Fuse Lo Pro, 8mm rails, PVC bumpers front and rear
Seatpost: Alloy two bolt, no offset, micro adjust, 25.4mm
Seat Binder: Integrated w/ replaceable single bolt