The Specialized P.1 2009 Mountain Bike has some differences compared to the P.2, while overall 2009 has a big makeover. 2009 Specialized P.1 Mountain Bike features a redesigned Specialized 100% Cr-Mo frame, shorter chainstays, 80mm-travel Marzocchi DJ3 fork, and Fuse tubular two-piece Cr-Mo cranks. The Specialized P.1 2009 is available in gloss burnt orange. MSRP is $940.00.

Specialized P.1 2009 Mountain Bike

(2 votes, average: 4.50 out of 5)

 Loading ...

Specialized P.1 2009 Mountain Bike Frameset
Frame: Specialized 100% Cr-Mo, double-butted HT/DT, externally relieved HT, disc mount, 6mm offset horizontal drop out for 26″ wheel w/ single- and multispeed hardware, disc only
Rear Shock: n/a
Fork: Marzocchi DJ3, 80mm, Cr-Mo steerer, 32mm Cr-Mo stanchions, magnesium lower, fixed rate catridge damping, coil/mcu w/ preload adj., “stiff” spring

Specialized P.1 2009 Mountain Bike Wheels
Rims: Specialized/Alex P.Disc AM, double wall disc w/ eyelets, 36h
Front Hub: Specialized, forged alloy, high/low flange, 36h, nutted 3/8″ axle
Rear Hub: Specialized Hi Lo, forged alloy, double sealed, ground race, cassette, nutted with 3/8″ axle, 36h
Spokes: 1.8mm (15g) stainless
Front Tire: Specialized Rhythm Control, 26×2.3″, 60TPI, aramid bead
Rear Tire: Specialized Rhythm Control, 26×2.3″, 60TPI, aramid bead
Inner Tubes: Specialized schraeder valve

Specialized P.1 2009 Mountain Bike Drivetrain
Front Derailleur: n/a
Rear Derailleur: n/a
Shift Levers: n/a
Cassette: Joy Tech, 2 alloy spacers w/ 1/2″ x 1/8″ x 14t Cr-Mo cog
Chain: KMC Z510HX, 1/2″ x 1/8″
Crankset: Fuse tubular heat treated Cr-Mo 3pc.
Chainrings: CNC cut 6061, 28t, Motostar design
Bottom Bracket: Fuse Euro, alloy cups, 4x cartridge bearing
Pedals: Specialized alloy platform, 9/16″

Specialized P.1 2009 Mountain Bike Components
Saddle: Specialized Fuse Lo Pro, 8mm rails, PVC bumpers front and rear
Seatpost: Specialized alloy two bolt, no offset, micro adjust, 30.9mm
Seat Binder: Integrated w/ replaceable single bolt
Headset: Tank FX, 1-1/8″ threadless w/ hollow bolt
Stem: Specialized aggro, 3D forged/CNC, 4-bolt, 35mm length
Handlebars: Specialized alloy riser bar, 31.8mm, 55mm rise, 680mm wide, 8 degree back sweep, 8 degree up
Grips: Fuse BMX, single compound, closed end, 140mm
Front Brake: Avid BB5, mechanical disc, caliper/adapter w/ 160mm G2 Clean Sweep rotor
Rear Brake: Avid BB5, mechanical disc, caliper/adapter w/ 140mm G2 Clean Sweep rotor
Brake Levers: Avid FR-5, alloy, two-finger, linear pull